{"title":"Metal Cutting End Mills","description":null,"products":[{"product_id":"1-4-3-flute-square-end-mill-for-aluminum-uncoated","title":"1\/4\" 3-Flute Square End Mill for Aluminum – Uncoated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-0304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevious Part Number\u003c\/td\u003e\n\u003ctd\u003eMR1-NF-EM-1-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eSquare End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/4\" (0.250\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (0.750\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eUncoated (Bright Finish)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eAluminum and Non-Ferrous Metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-0304 1\/4\" 3-Flute Square End Mill\u003c\/strong\u003e is designed for precision CNC milling of aluminum and other non-ferrous materials. Featuring a bright, uncoated finish and a three-flute cutting geometry, this end mill provides a balance of efficient material removal, chip evacuation, and surface finish quality.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ethree-flute design\u003c\/strong\u003e offers additional cutting edges compared to traditional two-flute end mills while maintaining space for chip evacuation during aluminum machining. Its uncoated cutting surfaces make it well suited for non-ferrous applications where clean, consistent cutting performance is essential.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/4\" cutting diameter, 3\/4\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this versatile end mill is ideal for precision profiling, slotting, pocketing, and general aluminum milling.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-0304 is a versatile cutting tool for machinists, fabricators, and manufacturers working with aluminum components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThree-flute geometry for efficient aluminum cutting and chip evacuation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUncoated bright finish suited for non-ferrous machining.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare-end cutting geometry for flat-bottom pockets, slots, and precise profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/4\" diameter for general-purpose machining and medium-size features.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801423638606,"sku":"LS-CT-0304","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/14-3-flute-square-end-mill-for-aluminum-uncoated-1963715.jpg?v=1793769369"},{"product_id":"3-8-3-flute-square-end-mill-for-aluminum-uncoated","title":"3\/8\" 3-Flute Square End Mill for Aluminum – Uncoated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-0306\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevious Part Number\u003c\/td\u003e\n\u003ctd\u003eMR1-NF-EM-3-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eSquare End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e3\/8\" (0.375\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1\" (1.000\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eUncoated (Bright Finish)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eAluminum and Non-Ferrous Metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-0306 3\/8\" 3-Flute Square End Mill\u003c\/strong\u003e is designed for precision CNC milling of aluminum and other non-ferrous materials. Featuring a bright, uncoated finish and a three-flute cutting geometry, this end mill provides a balance of efficient material removal, chip evacuation, and surface finish quality.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ethree-flute design\u003c\/strong\u003e offers additional cutting edges compared to traditional two-flute end mills while maintaining space for chip evacuation during aluminum machining. Its uncoated cutting surfaces make it well suited for non-ferrous applications where clean, consistent cutting performance is essential.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e3\/8\" cutting diameter, 1\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this mid-size end mill is ideal for precision profiling, slotting, pocketing, and general aluminum milling.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-0306 is a versatile cutting tool for machinists, fabricators, and manufacturers working with aluminum components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThree-flute geometry for efficient aluminum cutting and chip evacuation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUncoated bright finish suited for non-ferrous machining.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare-end cutting geometry for flat-bottom pockets, slots, and precise profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3\/8\" diameter for faster material removal and larger pockets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801424195662,"sku":"LS-CT-0306","price":35.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/38-3-flute-square-end-mill-for-aluminum-uncoated-2736685.jpg?v=1793769369"},{"product_id":"1-2-3-flute-square-end-mill-for-aluminum-uncoated","title":"1\/2\" 3-Flute Square End Mill for Aluminum – Uncoated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-0308\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevious Part Number\u003c\/td\u003e\n\u003ctd\u003eMR1-NF-EM-1-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eSquare End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/2\" (0.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1-1\/4\" (1.250\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e3\" (3.000\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eUncoated (Bright Finish)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eAluminum and Non-Ferrous Metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-0308 1\/2\" 3-Flute Square End Mill\u003c\/strong\u003e is designed for precision CNC milling of aluminum and other non-ferrous materials. Featuring a bright, uncoated finish and a three-flute cutting geometry, this end mill provides a balance of efficient material removal, chip evacuation, and surface finish quality.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ethree-flute design\u003c\/strong\u003e offers additional cutting edges compared to traditional two-flute end mills while maintaining space for chip evacuation during aluminum machining. Its uncoated cutting surfaces make it well suited for non-ferrous applications where clean, consistent cutting performance is essential.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/2\" cutting diameter, 1-1\/4\" length of cut, and 3\" overall length\u003c\/strong\u003e, this large-diameter end mill is ideal for precision profiling, slotting, pocketing, and general aluminum milling.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-0308 is a versatile cutting tool for machinists, fabricators, and manufacturers working with aluminum components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThree-flute geometry for efficient aluminum cutting and chip evacuation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUncoated bright finish suited for non-ferrous machining.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare-end cutting geometry for flat-bottom pockets, slots, and precise profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/2\" diameter for heavy material removal, large pockets and wide profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801424261198,"sku":"LS-CT-0308","price":65.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/12-3-flute-square-end-mill-for-aluminum-uncoated-3426546.jpg?v=1793769313"},{"product_id":"1-8-3-flute-ball-end-mill-for-aluminum-uncoated","title":"1\/8\" 3-Flute Ball End Mill for Aluminum – Uncoated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-0312\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevious Part Number\u003c\/td\u003e\n\u003ctd\u003eMR1-NF-BM-1-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eBall End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/8\" (0.125\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1\/2\" (0.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e1-1\/2\" (1.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eUncoated (Bright Finish)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eAluminum and Non-Ferrous Metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eBall End (Full Radius)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-0312 1\/8\" 3-Flute Ball End Mill\u003c\/strong\u003e is designed for precision CNC milling of aluminum and other non-ferrous materials. Featuring a bright, uncoated finish and a three-flute ball-end geometry, this end mill provides smooth 3D contours and a clean surface finish.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ethree-flute ball-end design\u003c\/strong\u003e cuts smooth contours and fillets while maintaining space for chip evacuation during aluminum machining. Its uncoated cutting surfaces make it well suited for non-ferrous applications where clean, consistent cutting performance is essential.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/8\" cutting diameter, 1\/2\" length of cut, and 1-1\/2\" overall length\u003c\/strong\u003e, this compact end mill is ideal for 3D contouring, surface finishing, fillets, and round-bottom slots.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-0312 is a versatile cutting tool for machinists, fabricators, and manufacturers working with aluminum components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThree-flute geometry for efficient aluminum cutting and chip evacuation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUncoated bright finish suited for non-ferrous machining.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBall-end geometry for 3D contours, fillets, and smooth surface finishes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/8\" diameter for detailed machining and smaller features.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801424326734,"sku":"LS-CT-0312","price":17.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/18-3-flute-ball-end-mill-for-aluminum-uncoated-7126529.jpg?v=1793769313"},{"product_id":"1-4-3-flute-ball-end-mill-for-aluminum-uncoated","title":"1\/4\" 3-Flute Ball End Mill for Aluminum – Uncoated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-0314\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevious Part Number\u003c\/td\u003e\n\u003ctd\u003eMR1-NF-BM-1-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eBall End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/4\" (0.250\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (0.750\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eUncoated (Bright Finish)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eAluminum and Non-Ferrous Metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eBall End (Full Radius)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-0314 1\/4\" 3-Flute Ball End Mill\u003c\/strong\u003e is designed for precision CNC milling of aluminum and other non-ferrous materials. Featuring a bright, uncoated finish and a three-flute ball-end geometry, this end mill provides smooth 3D contours and a clean surface finish.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ethree-flute ball-end design\u003c\/strong\u003e cuts smooth contours and fillets while maintaining space for chip evacuation during aluminum machining. Its uncoated cutting surfaces make it well suited for non-ferrous applications where clean, consistent cutting performance is essential.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/4\" cutting diameter, 3\/4\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this versatile end mill is ideal for 3D contouring, surface finishing, fillets, and round-bottom slots.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-0314 is a versatile cutting tool for machinists, fabricators, and manufacturers working with aluminum components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThree-flute geometry for efficient aluminum cutting and chip evacuation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUncoated bright finish suited for non-ferrous machining.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBall-end geometry for 3D contours, fillets, and smooth surface finishes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/4\" diameter for general-purpose machining and medium-size features.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801424392270,"sku":"LS-CT-0314","price":27.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/14-3-flute-ball-end-mill-for-aluminum-uncoated-1693762.jpg?v=1793769313"},{"product_id":"3-8-3-flute-ball-end-mill-for-aluminum-uncoated","title":"3\/8\" 3-Flute Ball End Mill for Aluminum – Uncoated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-0316\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevious Part Number\u003c\/td\u003e\n\u003ctd\u003eMR1-NF-BM-3-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eBall End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e3\/8\" (0.375\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1\" (1.000\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eUncoated (Bright Finish)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eAluminum and Non-Ferrous Metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eBall End (Full Radius)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-0316 3\/8\" 3-Flute Ball End Mill\u003c\/strong\u003e is designed for precision CNC milling of aluminum and other non-ferrous materials. Featuring a bright, uncoated finish and a three-flute ball-end geometry, this end mill provides smooth 3D contours and a clean surface finish.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ethree-flute ball-end design\u003c\/strong\u003e cuts smooth contours and fillets while maintaining space for chip evacuation during aluminum machining. Its uncoated cutting surfaces make it well suited for non-ferrous applications where clean, consistent cutting performance is essential.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e3\/8\" cutting diameter, 1\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this mid-size end mill is ideal for 3D contouring, surface finishing, fillets, and round-bottom slots.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-0316 is a versatile cutting tool for machinists, fabricators, and manufacturers working with aluminum components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThree-flute geometry for efficient aluminum cutting and chip evacuation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUncoated bright finish suited for non-ferrous machining.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBall-end geometry for 3D contours, fillets, and smooth surface finishes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3\/8\" diameter for faster material removal and larger pockets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801424457806,"sku":"LS-CT-0316","price":52.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/38-3-flute-ball-end-mill-for-aluminum-uncoated-6454865.jpg?v=1793769313"},{"product_id":"1-8-3-flute-square-end-mill-for-aluminum-dlc-coated","title":"1\/8\" 3-Flute Square End Mill for Aluminum – DLC Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-1302\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eSquare End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/8\" (0.125\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1\/2\" (0.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e1-1\/2\" (1.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eDLC (Diamond-Like Carbon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eAluminum and Non-Ferrous Metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-1302 1\/8\" 3-Flute Square End Mill\u003c\/strong\u003e is designed for precision CNC milling of aluminum and other non-ferrous materials. Featuring a slick DLC coating and a three-flute cutting geometry, this end mill provides a balance of efficient material removal, chip evacuation, and surface finish quality.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ethree-flute design\u003c\/strong\u003e offers additional cutting edges compared to traditional two-flute end mills while maintaining space for chip evacuation during aluminum machining. Its DLC (diamond-like carbon) coating gives the flutes a hard, slick surface that resists built-up edge, so aluminum chips release cleanly and the tool lasts longer than an uncoated end mill.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/8\" cutting diameter, 1\/2\" length of cut, and 1-1\/2\" overall length\u003c\/strong\u003e, this compact end mill is ideal for precision profiling, slotting, pocketing, and general aluminum milling.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-1302 is a versatile cutting tool for machinists, fabricators, and manufacturers working with aluminum components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThree-flute geometry for efficient aluminum cutting and chip evacuation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDLC coating resists built-up edge in aluminum.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare-end cutting geometry for flat-bottom pockets, slots, and precise profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/8\" diameter for detailed machining and smaller features.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801424523342,"sku":"LS-CT-1302","price":23.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/18-3-flute-square-end-mill-for-aluminum-dlc-coated-9200957.jpg?v=1793769311"},{"product_id":"1-4-3-flute-square-end-mill-for-aluminum-dlc-coated","title":"1\/4\" 3-Flute Square End Mill for Aluminum – DLC Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-1304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eSquare End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/4\" (0.250\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (0.750\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eDLC (Diamond-Like Carbon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eAluminum and Non-Ferrous Metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-1304 1\/4\" 3-Flute Square End Mill\u003c\/strong\u003e is designed for precision CNC milling of aluminum and other non-ferrous materials. Featuring a slick DLC coating and a three-flute cutting geometry, this end mill provides a balance of efficient material removal, chip evacuation, and surface finish quality.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ethree-flute design\u003c\/strong\u003e offers additional cutting edges compared to traditional two-flute end mills while maintaining space for chip evacuation during aluminum machining. Its DLC (diamond-like carbon) coating gives the flutes a hard, slick surface that resists built-up edge, so aluminum chips release cleanly and the tool lasts longer than an uncoated end mill.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/4\" cutting diameter, 3\/4\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this versatile end mill is ideal for precision profiling, slotting, pocketing, and general aluminum milling.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-1304 is a versatile cutting tool for machinists, fabricators, and manufacturers working with aluminum components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThree-flute geometry for efficient aluminum cutting and chip evacuation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDLC coating resists built-up edge in aluminum.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare-end cutting geometry for flat-bottom pockets, slots, and precise profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/4\" diameter for general-purpose machining and medium-size features.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801424752718,"sku":"LS-CT-1304","price":30.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/14-3-flute-square-end-mill-for-aluminum-dlc-coated-8968884.jpg?v=1793769311"},{"product_id":"3-8-3-flute-square-end-mill-for-aluminum-dlc-coated","title":"3\/8\" 3-Flute Square End Mill for Aluminum – DLC Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-1306\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eSquare End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e3\/8\" (0.375\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1\" (1.000\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eDLC (Diamond-Like Carbon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eAluminum and Non-Ferrous Metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-1306 3\/8\" 3-Flute Square End Mill\u003c\/strong\u003e is designed for precision CNC milling of aluminum and other non-ferrous materials. Featuring a slick DLC coating and a three-flute cutting geometry, this end mill provides a balance of efficient material removal, chip evacuation, and surface finish quality.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ethree-flute design\u003c\/strong\u003e offers additional cutting edges compared to traditional two-flute end mills while maintaining space for chip evacuation during aluminum machining. Its DLC (diamond-like carbon) coating gives the flutes a hard, slick surface that resists built-up edge, so aluminum chips release cleanly and the tool lasts longer than an uncoated end mill.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e3\/8\" cutting diameter, 1\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this mid-size end mill is ideal for precision profiling, slotting, pocketing, and general aluminum milling.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-1306 is a versatile cutting tool for machinists, fabricators, and manufacturers working with aluminum components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThree-flute geometry for efficient aluminum cutting and chip evacuation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDLC coating resists built-up edge in aluminum.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare-end cutting geometry for flat-bottom pockets, slots, and precise profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3\/8\" diameter for faster material removal and larger pockets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801424818254,"sku":"LS-CT-1306","price":55.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/38-3-flute-square-end-mill-for-aluminum-dlc-coated-2257487.jpg?v=1793769311"},{"product_id":"1-2-3-flute-square-end-mill-for-aluminum-dlc-coated","title":"1\/2\" 3-Flute Square End Mill for Aluminum – DLC Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-1308\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eSquare End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/2\" (0.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1-1\/4\" (1.250\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e3\" (3.000\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eDLC (Diamond-Like Carbon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eAluminum and Non-Ferrous Metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-1308 1\/2\" 3-Flute Square End Mill\u003c\/strong\u003e is designed for precision CNC milling of aluminum and other non-ferrous materials. Featuring a slick DLC coating and a three-flute cutting geometry, this end mill provides a balance of efficient material removal, chip evacuation, and surface finish quality.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ethree-flute design\u003c\/strong\u003e offers additional cutting edges compared to traditional two-flute end mills while maintaining space for chip evacuation during aluminum machining. Its DLC (diamond-like carbon) coating gives the flutes a hard, slick surface that resists built-up edge, so aluminum chips release cleanly and the tool lasts longer than an uncoated end mill.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/2\" cutting diameter, 1-1\/4\" length of cut, and 3\" overall length\u003c\/strong\u003e, this large-diameter end mill is ideal for precision profiling, slotting, pocketing, and general aluminum milling.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-1308 is a versatile cutting tool for machinists, fabricators, and manufacturers working with aluminum components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThree-flute geometry for efficient aluminum cutting and chip evacuation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDLC coating resists built-up edge in aluminum.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare-end cutting geometry for flat-bottom pockets, slots, and precise profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/2\" diameter for heavy material removal, large pockets and wide profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801424916558,"sku":"LS-CT-1308","price":92.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/12-3-flute-square-end-mill-for-aluminum-dlc-coated-5477397.jpg?v=1793769311"},{"product_id":"1-8-3-flute-ball-end-mill-for-aluminum-dlc-coated","title":"1\/8\" 3-Flute Ball End Mill for Aluminum – DLC Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-1312\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eBall End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/8\" (0.125\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1\/2\" (0.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e1-1\/2\" (1.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eDLC (Diamond-Like Carbon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eAluminum and Non-Ferrous Metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eBall End (Full Radius)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-1312 1\/8\" 3-Flute Ball End Mill\u003c\/strong\u003e is designed for precision CNC milling of aluminum and other non-ferrous materials. Featuring a slick DLC coating and a three-flute ball-end geometry, this end mill provides smooth 3D contours and a clean surface finish.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ethree-flute ball-end design\u003c\/strong\u003e cuts smooth contours and fillets while maintaining space for chip evacuation during aluminum machining. Its DLC (diamond-like carbon) coating gives the flutes a hard, slick surface that resists built-up edge, so aluminum chips release cleanly and the tool lasts longer than an uncoated end mill.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/8\" cutting diameter, 1\/2\" length of cut, and 1-1\/2\" overall length\u003c\/strong\u003e, this compact end mill is ideal for 3D contouring, surface finishing, fillets, and round-bottom slots.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-1312 is a versatile cutting tool for machinists, fabricators, and manufacturers working with aluminum components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThree-flute geometry for efficient aluminum cutting and chip evacuation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDLC coating resists built-up edge in aluminum.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBall-end geometry for 3D contours, fillets, and smooth surface finishes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/8\" diameter for detailed machining and smaller features.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801424982094,"sku":"LS-CT-1312","price":27.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/18-3-flute-ball-end-mill-for-aluminum-dlc-coated-2237924.jpg?v=1793769311"},{"product_id":"1-4-3-flute-ball-end-mill-for-aluminum-dlc-coated","title":"1\/4\" 3-Flute Ball End Mill for Aluminum – DLC Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-1314\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eBall End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/4\" (0.250\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (0.750\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eDLC (Diamond-Like Carbon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eAluminum and Non-Ferrous Metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eBall End (Full Radius)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-1314 1\/4\" 3-Flute Ball End Mill\u003c\/strong\u003e is designed for precision CNC milling of aluminum and other non-ferrous materials. Featuring a slick DLC coating and a three-flute ball-end geometry, this end mill provides smooth 3D contours and a clean surface finish.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ethree-flute ball-end design\u003c\/strong\u003e cuts smooth contours and fillets while maintaining space for chip evacuation during aluminum machining. Its DLC (diamond-like carbon) coating gives the flutes a hard, slick surface that resists built-up edge, so aluminum chips release cleanly and the tool lasts longer than an uncoated end mill.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/4\" cutting diameter, 3\/4\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this versatile end mill is ideal for 3D contouring, surface finishing, fillets, and round-bottom slots.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-1314 is a versatile cutting tool for machinists, fabricators, and manufacturers working with aluminum components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThree-flute geometry for efficient aluminum cutting and chip evacuation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDLC coating resists built-up edge in aluminum.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBall-end geometry for 3D contours, fillets, and smooth surface finishes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/4\" diameter for general-purpose machining and medium-size features.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801425080398,"sku":"LS-CT-1314","price":37.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/14-3-flute-ball-end-mill-for-aluminum-dlc-coated-5215875.jpg?v=1793769312"},{"product_id":"3-8-3-flute-ball-end-mill-for-aluminum-dlc-coated","title":"3\/8\" 3-Flute Ball End Mill for Aluminum – DLC Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-1316\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eBall End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e3\/8\" (0.375\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1\" (1.000\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eDLC (Diamond-Like Carbon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eAluminum and Non-Ferrous Metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eBall End (Full Radius)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-1316 3\/8\" 3-Flute Ball End Mill\u003c\/strong\u003e is designed for precision CNC milling of aluminum and other non-ferrous materials. Featuring a slick DLC coating and a three-flute ball-end geometry, this end mill provides smooth 3D contours and a clean surface finish.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ethree-flute ball-end design\u003c\/strong\u003e cuts smooth contours and fillets while maintaining space for chip evacuation during aluminum machining. Its DLC (diamond-like carbon) coating gives the flutes a hard, slick surface that resists built-up edge, so aluminum chips release cleanly and the tool lasts longer than an uncoated end mill.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e3\/8\" cutting diameter, 1\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this mid-size end mill is ideal for 3D contouring, surface finishing, fillets, and round-bottom slots.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-1316 is a versatile cutting tool for machinists, fabricators, and manufacturers working with aluminum components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThree-flute geometry for efficient aluminum cutting and chip evacuation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDLC coating resists built-up edge in aluminum.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBall-end geometry for 3D contours, fillets, and smooth surface finishes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3\/8\" diameter for faster material removal and larger pockets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801425145934,"sku":"LS-CT-1316","price":62.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/38-3-flute-ball-end-mill-for-aluminum-dlc-coated-1420001.jpg?v=1793769311"},{"product_id":"1-8-4-flute-square-end-mill-for-steel-altin-coated","title":"1\/8\" 4-Flute Square End Mill for Steel – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2402\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevious Part Number\u003c\/td\u003e\n\u003ctd\u003eMR1-F-EM-1-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eSquare End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/8\" (0.125\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1\/2\" (0.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e1-1\/2\" (1.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eSteel and Cast Iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2402 1\/8\" 4-Flute Square End Mill\u003c\/strong\u003e is designed for precision CNC milling of mild steel, alloy steel and cast iron. Featuring a heat-resistant AlTiN coating and a four-flute cutting geometry, this end mill provides strength, tool life, and a smooth finish in ferrous metals.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003efour-flute design\u003c\/strong\u003e gives a strong core and a smooth finish in steel while leaving room to clear chips at typical CNC feed rates. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/8\" cutting diameter, 1\/2\" length of cut, and 1-1\/2\" overall length\u003c\/strong\u003e, this compact end mill is ideal for precision profiling, slotting, pocketing, and general steel milling.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2402 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel and cast iron parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFour-flute geometry for strength and a smooth finish in steel and cast iron.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare-end cutting geometry for flat-bottom pockets, slots, and precise profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/8\" diameter for detailed machining and smaller features.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801426096206,"sku":"LS-CT-2402","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/18-4-flute-square-end-mill-for-steel-altin-coated-9261079.jpg?v=1793769311"},{"product_id":"1-4-4-flute-square-end-mill-for-steel-altin-coated","title":"1\/4\" 4-Flute Square End Mill for Steel – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2404\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevious Part Number\u003c\/td\u003e\n\u003ctd\u003eMR1-F-EM-1-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eSquare End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/4\" (0.250\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e5\/8\" (0.625\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eSteel and Cast Iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2404 1\/4\" 4-Flute Square End Mill\u003c\/strong\u003e is designed for precision CNC milling of mild steel, alloy steel and cast iron. Featuring a heat-resistant AlTiN coating and a four-flute cutting geometry, this end mill provides strength, tool life, and a smooth finish in ferrous metals.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003efour-flute design\u003c\/strong\u003e gives a strong core and a smooth finish in steel while leaving room to clear chips at typical CNC feed rates. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/4\" cutting diameter, 5\/8\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this versatile end mill is ideal for precision profiling, slotting, pocketing, and general steel milling.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2404 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel and cast iron parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFour-flute geometry for strength and a smooth finish in steel and cast iron.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare-end cutting geometry for flat-bottom pockets, slots, and precise profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/4\" diameter for general-purpose machining and medium-size features.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801426161742,"sku":"LS-CT-2404","price":17.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/14-4-flute-square-end-mill-for-steel-altin-coated-1633573.jpg?v=1793769311"},{"product_id":"3-8-4-flute-square-end-mill-for-steel-altin-coated","title":"3\/8\" 4-Flute Square End Mill for Steel – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2406\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevious Part Number\u003c\/td\u003e\n\u003ctd\u003eMR1-F-EM-3-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eSquare End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e3\/8\" (0.375\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e7\/8\" (0.875\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eSteel and Cast Iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2406 3\/8\" 4-Flute Square End Mill\u003c\/strong\u003e is designed for precision CNC milling of mild steel, alloy steel and cast iron. Featuring a heat-resistant AlTiN coating and a four-flute cutting geometry, this end mill provides strength, tool life, and a smooth finish in ferrous metals.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003efour-flute design\u003c\/strong\u003e gives a strong core and a smooth finish in steel while leaving room to clear chips at typical CNC feed rates. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e3\/8\" cutting diameter, 7\/8\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this mid-size end mill is ideal for precision profiling, slotting, pocketing, and general steel milling.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2406 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel and cast iron parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFour-flute geometry for strength and a smooth finish in steel and cast iron.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare-end cutting geometry for flat-bottom pockets, slots, and precise profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3\/8\" diameter for faster material removal and larger pockets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801426194510,"sku":"LS-CT-2406","price":38.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/38-4-flute-square-end-mill-for-steel-altin-coated-9845648.jpg?v=1793769311"},{"product_id":"1-2-4-flute-square-end-mill-for-steel-altin-coated","title":"1\/2\" 4-Flute Square End Mill for Steel – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2408\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevious Part Number\u003c\/td\u003e\n\u003ctd\u003eMR1-F-EM-1-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eSquare End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/2\" (0.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1\" (1.000\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e3\" (3.000\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eSteel and Cast Iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2408 1\/2\" 4-Flute Square End Mill\u003c\/strong\u003e is designed for precision CNC milling of mild steel, alloy steel and cast iron. Featuring a heat-resistant AlTiN coating and a four-flute cutting geometry, this end mill provides strength, tool life, and a smooth finish in ferrous metals.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003efour-flute design\u003c\/strong\u003e gives a strong core and a smooth finish in steel while leaving room to clear chips at typical CNC feed rates. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/2\" cutting diameter, 1\" length of cut, and 3\" overall length\u003c\/strong\u003e, this large-diameter end mill is ideal for precision profiling, slotting, pocketing, and general steel milling.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2408 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel and cast iron parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFour-flute geometry for strength and a smooth finish in steel and cast iron.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare-end cutting geometry for flat-bottom pockets, slots, and precise profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/2\" diameter for heavy material removal, large pockets and wide profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801426260046,"sku":"LS-CT-2408","price":60.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/12-4-flute-square-end-mill-for-steel-altin-coated-8115034.jpg?v=1793769311"},{"product_id":"1-8-4-flute-ball-end-mill-for-steel-altin-coated","title":"1\/8\" 4-Flute Ball End Mill for Steel – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevious Part Number\u003c\/td\u003e\n\u003ctd\u003eMR1-F-BM-1-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eBall End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/8\" (0.125\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e3\/8\" (0.375\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e1-1\/2\" (1.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eSteel and Cast Iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eBall End (Full Radius)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2412 1\/8\" 4-Flute Ball End Mill\u003c\/strong\u003e is designed for precision CNC milling of mild steel, alloy steel and cast iron. Featuring a heat-resistant AlTiN coating and a four-flute ball-end geometry, this end mill provides smooth 3D contours and a clean surface finish.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003efour-flute ball-end design\u003c\/strong\u003e gives a strong core for contouring steel and cast iron and leaves a smooth surface finish on 3D contours. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/8\" cutting diameter, 3\/8\" length of cut, and 1-1\/2\" overall length\u003c\/strong\u003e, this compact end mill is ideal for 3D contouring, surface finishing, fillets, and round-bottom slots.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2412 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel and cast iron parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFour-flute geometry for strength and a smooth finish in steel and cast iron.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBall-end geometry for 3D contours, fillets, and smooth surface finishes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/8\" diameter for detailed machining and smaller features.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801426686030,"sku":"LS-CT-2412","price":6.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/18-4-flute-ball-end-mill-for-steel-altin-coated-9716847.jpg?v=1793769311"},{"product_id":"1-4-4-flute-ball-end-mill-for-steel-altin-coated","title":"1\/4\" 4-Flute Ball End Mill for Steel – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2414\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevious Part Number\u003c\/td\u003e\n\u003ctd\u003eMR1-F-BM-1-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eBall End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/4\" (0.250\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (0.750\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eSteel and Cast Iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eBall End (Full Radius)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2414 1\/4\" 4-Flute Ball End Mill\u003c\/strong\u003e is designed for precision CNC milling of mild steel, alloy steel and cast iron. Featuring a heat-resistant AlTiN coating and a four-flute ball-end geometry, this end mill provides smooth 3D contours and a clean surface finish.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003efour-flute ball-end design\u003c\/strong\u003e gives a strong core for contouring steel and cast iron and leaves a smooth surface finish on 3D contours. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/4\" cutting diameter, 3\/4\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this versatile end mill is ideal for 3D contouring, surface finishing, fillets, and round-bottom slots.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2414 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel and cast iron parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFour-flute geometry for strength and a smooth finish in steel and cast iron.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBall-end geometry for 3D contours, fillets, and smooth surface finishes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/4\" diameter for general-purpose machining and medium-size features.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801426751566,"sku":"LS-CT-2414","price":17.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/14-4-flute-ball-end-mill-for-steel-altin-coated-2045792.jpg?v=1793769311"},{"product_id":"3-8-4-flute-ball-end-mill-for-steel-altin-coated","title":"3\/8\" 4-Flute Ball End Mill for Steel – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2416\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevious Part Number\u003c\/td\u003e\n\u003ctd\u003eMR1-F-BM-3-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eBall End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e3\/8\" (0.375\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1\" (1.000\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eSteel and Cast Iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eBall End (Full Radius)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2416 3\/8\" 4-Flute Ball End Mill\u003c\/strong\u003e is designed for precision CNC milling of mild steel, alloy steel and cast iron. Featuring a heat-resistant AlTiN coating and a four-flute ball-end geometry, this end mill provides smooth 3D contours and a clean surface finish.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003efour-flute ball-end design\u003c\/strong\u003e gives a strong core for contouring steel and cast iron and leaves a smooth surface finish on 3D contours. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e3\/8\" cutting diameter, 1\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this mid-size end mill is ideal for 3D contouring, surface finishing, fillets, and round-bottom slots.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2416 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel and cast iron parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFour-flute geometry for strength and a smooth finish in steel and cast iron.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBall-end geometry for 3D contours, fillets, and smooth surface finishes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3\/8\" diameter for faster material removal and larger pockets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801426817102,"sku":"LS-CT-2416","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/38-4-flute-ball-end-mill-for-steel-altin-coated-1384275.jpg?v=1793769311"},{"product_id":"3-8-4-flute-roughing-end-mill-for-steel-altin-coated","title":"3\/8\" 4-Flute Roughing End Mill for Steel – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2466\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevious Part Number\u003c\/td\u003e\n\u003ctd\u003eMR1-F-REM-3-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eRoughing End Mill (Chip-Breaker Flutes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e3\/8\" (0.375\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e5\/8\" (0.625\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eSteel and Cast Iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2466 3\/8\" 4-Flute Roughing End Mill\u003c\/strong\u003e is designed for precision CNC milling of mild steel, alloy steel and cast iron. Featuring a heat-resistant AlTiN coating and serrated chip-breaker flutes, this end mill provides fast material removal with lower cutting forces.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eserrated chip-breaker flutes\u003c\/strong\u003e cut chips into small pieces, which lowers cutting forces and heat so you can take deeper, faster roughing cuts than with a standard end mill. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e3\/8\" cutting diameter, 5\/8\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this mid-size end mill is ideal for high-volume roughing, full-width slotting, and fast material removal ahead of a finishing pass.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2466 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel and cast iron parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSerrated chip-breaker flutes for fast, low-force roughing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare end with a roughing profile for fast material removal.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3\/8\" diameter for faster material removal and larger pockets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801426849870,"sku":"LS-CT-2466","price":45.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/38-4-flute-roughing-end-mill-for-steel-altin-coated-9009870.jpg?v=1793769309"},{"product_id":"1-4-6-flute-finishing-end-mill-for-steel-stainless-altin-coated","title":"1\/4\" 6-Flute Finishing End Mill for Steel \u0026 Stainless – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2604\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eFinishing End Mill (Equal Index)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/4\" (0.250\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (0.750\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eFinishing Steel, Stainless Steel and Hard Alloys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2604 1\/4\" 6-Flute Finishing End Mill\u003c\/strong\u003e is designed for precision CNC milling of steel, stainless steel and hard alloys. Featuring a heat-resistant AlTiN coating and a six-flute, equal-index geometry, this end mill provides a fine surface finish at higher feed rates.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003esix-flute, equal-index design\u003c\/strong\u003e puts more cutting edges in contact with the part, giving a fine surface finish at higher feed rates on finishing passes. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel, stainless steel and hard alloys.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/4\" cutting diameter, 3\/4\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this versatile end mill is ideal for finishing passes on walls and floors, profiling, and light-to-medium cuts with a fine surface finish.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2604 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel and stainless parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSix-flute, equal-index geometry for fine finishing at higher feed rates.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare-end finishing geometry for flat floors and clean walls.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/4\" diameter for finishing small pockets and detailed profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801426915406,"sku":"LS-CT-2604","price":26.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/14-6-flute-finishing-end-mill-for-steel-stainless-altin-coated-4466253.jpg?v=1793769309"},{"product_id":"3-8-6-flute-finishing-end-mill-for-steel-stainless-altin-coated","title":"3\/8\" 6-Flute Finishing End Mill for Steel \u0026 Stainless – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2606\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eFinishing End Mill (Equal Index)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e3\/8\" (0.375\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1\" (1.000\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eFinishing Steel, Stainless Steel and Hard Alloys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2606 3\/8\" 6-Flute Finishing End Mill\u003c\/strong\u003e is designed for precision CNC milling of steel, stainless steel and hard alloys. Featuring a heat-resistant AlTiN coating and a six-flute, equal-index geometry, this end mill provides a fine surface finish at higher feed rates.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003esix-flute, equal-index design\u003c\/strong\u003e puts more cutting edges in contact with the part, giving a fine surface finish at higher feed rates on finishing passes. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel, stainless steel and hard alloys.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e3\/8\" cutting diameter, 1\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this mid-size end mill is ideal for finishing passes on walls and floors, profiling, and light-to-medium cuts with a fine surface finish.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2606 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel and stainless parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSix-flute, equal-index geometry for fine finishing at higher feed rates.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare-end finishing geometry for flat floors and clean walls.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3\/8\" diameter for finishing medium pockets and walls.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801426948174,"sku":"LS-CT-2606","price":55.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/38-6-flute-finishing-end-mill-for-steel-stainless-altin-coated-3200087.jpg?v=1793769309"},{"product_id":"1-2-6-flute-finishing-end-mill-for-steel-stainless-altin-coated","title":"1\/2\" 6-Flute Finishing End Mill for Steel \u0026 Stainless – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2608\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eFinishing End Mill (Equal Index)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/2\" (0.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1-1\/4\" (1.250\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e3\" (3.000\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eFinishing Steel, Stainless Steel and Hard Alloys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2608 1\/2\" 6-Flute Finishing End Mill\u003c\/strong\u003e is designed for precision CNC milling of steel, stainless steel and hard alloys. Featuring a heat-resistant AlTiN coating and a six-flute, equal-index geometry, this end mill provides a fine surface finish at higher feed rates.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003esix-flute, equal-index design\u003c\/strong\u003e puts more cutting edges in contact with the part, giving a fine surface finish at higher feed rates on finishing passes. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel, stainless steel and hard alloys.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/2\" cutting diameter, 1-1\/4\" length of cut, and 3\" overall length\u003c\/strong\u003e, this large-diameter end mill is ideal for finishing passes on walls and floors, profiling, and light-to-medium cuts with a fine surface finish.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2608 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel and stainless parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSix-flute, equal-index geometry for fine finishing at higher feed rates.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare-end finishing geometry for flat floors and clean walls.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/2\" diameter for finishing large walls, floors and profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801426980942,"sku":"LS-CT-2608","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/12-6-flute-finishing-end-mill-for-steel-stainless-altin-coated-6225309.jpg?v=1793769309"},{"product_id":"1-4-5-flute-variable-index-finishing-end-mill-for-stainless-hardened-steel-altin-coated","title":"1\/4\" 5-Flute Variable Index Finishing End Mill for Stainless \u0026 Hardened Steel – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2504\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eFinishing End Mill (Variable Index)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/4\" (0.250\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (0.750\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eStainless Steel, Titanium and Hardened Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2504 1\/4\" 5-Flute Finishing End Mill\u003c\/strong\u003e is designed for precision CNC milling of stainless steel, titanium, high-temperature alloys and hardened steel. Featuring a heat-resistant AlTiN coating and a five-flute, variable-index geometry, this end mill provides chatter-free finishing in tough materials.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003efive-flute, variable-index design\u003c\/strong\u003e spaces the flutes unevenly to break up the harmonics that cause chatter, so it holds a clean finish in stainless steel, titanium and hardened steel. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel, stainless steel and hard alloys.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/4\" cutting diameter, 3\/4\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this versatile end mill is ideal for finishing passes on walls and floors, profiling, and light-to-medium cuts with a fine surface finish.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2504 is a versatile cutting tool for machinists, fabricators, and manufacturers working with stainless, titanium and hardened steel parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e5-flute, variable-index geometry that reduces chatter in tough materials.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare-end finishing geometry for flat floors and clean walls.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/4\" diameter for finishing small pockets and detailed profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801427046478,"sku":"LS-CT-2504","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/14-5-flute-variable-index-finishing-end-mill-for-stainless-hardened-steel-altin-coated-7811290.jpg?v=1793769309"},{"product_id":"3-8-7-flute-variable-index-finishing-end-mill-for-stainless-hardened-steel-altin-coated","title":"3\/8\" 7-Flute Variable Index Finishing End Mill for Stainless \u0026 Hardened Steel – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2706\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eFinishing End Mill (Variable Index)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e3\/8\" (0.375\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1\" (1.000\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eStainless Steel, Titanium and Hardened Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2706 3\/8\" 7-Flute Finishing End Mill\u003c\/strong\u003e is designed for precision CNC milling of stainless steel, titanium, high-temperature alloys and hardened steel. Featuring a heat-resistant AlTiN coating and a seven-flute, variable-index geometry, this end mill provides chatter-free finishing in tough materials.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eseven-flute, variable-index design\u003c\/strong\u003e spaces the flutes unevenly to break up the harmonics that cause chatter, so it holds a clean finish in stainless steel, titanium and hardened steel. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel, stainless steel and hard alloys.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e3\/8\" cutting diameter, 1\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this mid-size end mill is ideal for finishing passes on walls and floors, profiling, and light-to-medium cuts with a fine surface finish.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2706 is a versatile cutting tool for machinists, fabricators, and manufacturers working with stainless, titanium and hardened steel parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e7-flute, variable-index geometry that reduces chatter in tough materials.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare-end finishing geometry for flat floors and clean walls.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3\/8\" diameter for finishing medium pockets and walls.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801427112014,"sku":"LS-CT-2706","price":73.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/38-7-flute-variable-index-finishing-end-mill-for-stainless-hardened-steel-altin-coated-1129680.jpg?v=1793769309"},{"product_id":"1-2-7-flute-variable-index-finishing-end-mill-for-stainless-hardened-steel-altin-coated","title":"1\/2\" 7-Flute Variable Index Finishing End Mill for Stainless \u0026 Hardened Steel – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2708\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eFinishing End Mill (Variable Index)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/2\" (0.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1-1\/4\" (1.250\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e3\" (3.000\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eStainless Steel, Titanium and Hardened Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003eSquare End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2708 1\/2\" 7-Flute Finishing End Mill\u003c\/strong\u003e is designed for precision CNC milling of stainless steel, titanium, high-temperature alloys and hardened steel. Featuring a heat-resistant AlTiN coating and a seven-flute, variable-index geometry, this end mill provides chatter-free finishing in tough materials.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eseven-flute, variable-index design\u003c\/strong\u003e spaces the flutes unevenly to break up the harmonics that cause chatter, so it holds a clean finish in stainless steel, titanium and hardened steel. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel, stainless steel and hard alloys.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/2\" cutting diameter, 1-1\/4\" length of cut, and 3\" overall length\u003c\/strong\u003e, this large-diameter end mill is ideal for finishing passes on walls and floors, profiling, and light-to-medium cuts with a fine surface finish.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2708 is a versatile cutting tool for machinists, fabricators, and manufacturers working with stainless, titanium and hardened steel parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e7-flute, variable-index geometry that reduces chatter in tough materials.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSquare-end finishing geometry for flat floors and clean walls.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/2\" diameter for finishing large walls, floors and profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801427177550,"sku":"LS-CT-2708","price":111.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/12-7-flute-variable-index-finishing-end-mill-for-stainless-hardened-steel-altin-coated-9495252.jpg?v=1793769309"},{"product_id":"1-8-4-flute-bullnose-end-mill-0-030-radius-for-steel-altin-coated","title":"1\/8\" 4-Flute Bullnose End Mill (0.030\" Radius) for Steel – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2422\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eBullnose End Mill (0.030\" Corner Radius)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/8\" (0.125\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1\/2\" (0.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e1-1\/2\" (1.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eSteel and Cast Iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003e0.030\" Corner Radius\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2422 1\/8\" 4-Flute Bullnose End Mill\u003c\/strong\u003e is designed for precision CNC milling of mild steel, alloy steel and cast iron. Featuring a heat-resistant AlTiN coating and a four-flute geometry with a 0.030\" corner radius, this end mill provides a stronger cutting corner and longer tool life.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e0.030\" corner radius\u003c\/strong\u003e strengthens the cutting corner against chipping and leaves a filleted floor instead of a sharp inside corner. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/8\" cutting diameter, 1\/2\" length of cut, and 1-1\/2\" overall length\u003c\/strong\u003e, this compact end mill is ideal for pocketing with filleted corners, 3D roughing, and profiling where a stronger corner is needed.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2422 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel and cast iron parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFour-flute geometry for strength and a smooth finish in steel and cast iron.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.030\" corner radius for a stronger edge and filleted pocket floors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/8\" diameter for detailed machining and smaller features.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801427210318,"sku":"LS-CT-2422","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/18-4-flute-bullnose-end-mill-0030-radius-for-steel-altin-coated-5663222.jpg?v=1793769309"},{"product_id":"1-4-4-flute-bullnose-end-mill-0-030-radius-for-steel-altin-coated","title":"1\/4\" 4-Flute Bullnose End Mill (0.030\" Radius) for Steel – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2424\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eBullnose End Mill (0.030\" Corner Radius)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/4\" (0.250\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (0.750\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eSteel and Cast Iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003e0.030\" Corner Radius\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2424 1\/4\" 4-Flute Bullnose End Mill\u003c\/strong\u003e is designed for precision CNC milling of mild steel, alloy steel and cast iron. Featuring a heat-resistant AlTiN coating and a four-flute geometry with a 0.030\" corner radius, this end mill provides a stronger cutting corner and longer tool life.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e0.030\" corner radius\u003c\/strong\u003e strengthens the cutting corner against chipping and leaves a filleted floor instead of a sharp inside corner. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/4\" cutting diameter, 3\/4\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this versatile end mill is ideal for pocketing with filleted corners, 3D roughing, and profiling where a stronger corner is needed.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2424 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel and cast iron parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFour-flute geometry for strength and a smooth finish in steel and cast iron.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.030\" corner radius for a stronger edge and filleted pocket floors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/4\" diameter for general-purpose machining and medium-size features.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801428324430,"sku":"LS-CT-2424","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/14-4-flute-bullnose-end-mill-0030-radius-for-steel-altin-coated-1326147.jpg?v=1793769309"},{"product_id":"3-8-4-flute-bullnose-end-mill-0-030-radius-for-steel-altin-coated","title":"3\/8\" 4-Flute Bullnose End Mill (0.030\" Radius) for Steel – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2426\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eBullnose End Mill (0.030\" Corner Radius)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e3\/8\" (0.375\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1\" (1.000\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" (2.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eSteel and Cast Iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003e0.030\" Corner Radius\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2426 3\/8\" 4-Flute Bullnose End Mill\u003c\/strong\u003e is designed for precision CNC milling of mild steel, alloy steel and cast iron. Featuring a heat-resistant AlTiN coating and a four-flute geometry with a 0.030\" corner radius, this end mill provides a stronger cutting corner and longer tool life.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e0.030\" corner radius\u003c\/strong\u003e strengthens the cutting corner against chipping and leaves a filleted floor instead of a sharp inside corner. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e3\/8\" cutting diameter, 1\" length of cut, and 2-1\/2\" overall length\u003c\/strong\u003e, this mid-size end mill is ideal for pocketing with filleted corners, 3D roughing, and profiling where a stronger corner is needed.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2426 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel and cast iron parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFour-flute geometry for strength and a smooth finish in steel and cast iron.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.030\" corner radius for a stronger edge and filleted pocket floors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3\/8\" diameter for faster material removal and larger pockets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801428553806,"sku":"LS-CT-2426","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/38-4-flute-bullnose-end-mill-0030-radius-for-steel-altin-coated-6758409.jpg?v=1793769309"},{"product_id":"1-2-4-flute-bullnose-end-mill-0-030-radius-for-steel-altin-coated","title":"1\/2\" 4-Flute Bullnose End Mill (0.030\" Radius) for Steel – AlTiN Coated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-2428\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eBullnose End Mill (0.030\" Corner Radius)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/2\" (0.500\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength of Cut (LOC)\u003c\/td\u003e\n\u003ctd\u003e1-1\/4\" (1.250\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e3\" (3.000\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eAlTiN (Aluminum Titanium Nitride)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eSteel and Cast Iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003e0.030\" Corner Radius\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-2428 1\/2\" 4-Flute Bullnose End Mill\u003c\/strong\u003e is designed for precision CNC milling of mild steel, alloy steel and cast iron. Featuring a heat-resistant AlTiN coating and a four-flute geometry with a 0.030\" corner radius, this end mill provides a stronger cutting corner and longer tool life.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e0.030\" corner radius\u003c\/strong\u003e strengthens the cutting corner against chipping and leaves a filleted floor instead of a sharp inside corner. Its AlTiN (aluminum titanium nitride) coating holds up to the heat of cutting ferrous metals, protecting the cutting edge and extending tool life in steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/2\" cutting diameter, 1-1\/4\" length of cut, and 3\" overall length\u003c\/strong\u003e, this large-diameter end mill is ideal for pocketing with filleted corners, 3D roughing, and profiling where a stronger corner is needed.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-2428 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel and cast iron parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFour-flute geometry for strength and a smooth finish in steel and cast iron.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlTiN coating for heat resistance and longer tool life in ferrous metals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.030\" corner radius for a stronger edge and filleted pocket floors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/2\" diameter for heavy material removal, large pockets and wide profiles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801428619342,"sku":"LS-CT-2428","price":78.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/12-4-flute-bullnose-end-mill-0030-radius-for-steel-altin-coated-7265194.jpg?v=1793769309"},{"product_id":"1-4-90-degree-chamfer-mill-2-flute-uncoated","title":"1\/4\" 90° Chamfer Mill, 2-Flute – Uncoated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-0254\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevious Part Number\u003c\/td\u003e\n\u003ctd\u003eMR1-CHAMFER-MILL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eChamfer Mill (90°)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/4\" (0.250\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length (OAL)\u003c\/td\u003e\n\u003ctd\u003e2\" (2.000\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eUncoated (Bright Finish)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eChamfering and Edge Prep in Steel, Cast Iron and Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003e90° Included Angle (45° Chamfer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-0254 1\/4\" 90° Chamfer Mill\u003c\/strong\u003e is designed for precision CNC milling of steel, cast iron and aluminum. Featuring sharp, uncoated carbide edges and a two-flute, 90° cutting profile, this chamfer mill provides clean, consistent chamfers and edge breaks.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003etwo-flute, 90° profile\u003c\/strong\u003e cuts a clean, consistent 45° chamfer along part edges and doubles as a deburring tool. Sharp, uncoated carbide edges cut cleanly in aluminum, steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/4\" cutting diameter and 2\" overall length\u003c\/strong\u003e, this versatile chamfer mill is ideal for chamfering, edge breaking, and deburring part edges.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-0254 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel, aluminum and cast iron parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e2-flute, 90° geometry for clean 45° chamfers and edge breaks.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUncoated solid carbide with sharp cutting edges.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOne tool for chamfers, edge breaks and deburring.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/4\" diameter for chamfering edges and holes on small and large parts.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801428684878,"sku":"LS-CT-0254","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/14-90-chamfer-mill-2-flute-uncoated-3420754.jpg?v=1793769309"},{"product_id":"1-4-45-degree-dovetail-cutter-4-flute-uncoated","title":"1\/4\" 45° Dovetail Cutter, 4-Flute – Uncoated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-0444\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eDovetail Cutter (45°)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/4\" (0.250\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eUncoated (Bright Finish)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eChamfering and Edge Prep in Steel, Cast Iron and Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003e45° Dovetail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-0444 1\/4\" 45° Dovetail Cutter\u003c\/strong\u003e is designed for precision CNC milling of steel, cast iron and aluminum. Featuring sharp, uncoated carbide edges and a four-flute, 45° dovetail profile, this dovetail cutter provides clean, accurate undercuts in one setup.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e45° dovetail profile\u003c\/strong\u003e with four flutes cuts accurate dovetail slots and undercuts in a single pass. Sharp, uncoated carbide edges cut cleanly in aluminum, steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/4\" cutting diameter\u003c\/strong\u003e, this versatile dovetail cutter is ideal for dovetail slots, undercuts, and back-chamfering.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-0444 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel, aluminum and cast iron parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e4-flute, 45° dovetail profile for slots and undercuts.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUncoated solid carbide with sharp cutting edges.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e45° dovetail angle for accurate dovetail slots.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/4\" diameter for cutting dovetail slots and undercuts.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801428783182,"sku":"LS-CT-0444","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/14-45-dovetail-cutter-4-flute-uncoated-7394846.jpg?v=1793769309"},{"product_id":"1-4-60-degree-dovetail-cutter-4-flute-uncoated","title":"1\/4\" 60° Dovetail Cutter, 4-Flute – Uncoated","description":"\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eLS-CT-0434\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eDovetail Cutter (60°)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Diameter\u003c\/td\u003e\n\u003ctd\u003e1\/4\" (0.250\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Flutes\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating \/ Finish\u003c\/td\u003e\n\u003ctd\u003eUncoated (Bright Finish)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eChamfering and Edge Prep in Steel, Cast Iron and Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Geometry\u003c\/td\u003e\n\u003ctd\u003e60° Dovetail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum \u0026amp; Non-Ferrous Metals (ISO N):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSteel (ISO P):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron (ISO K):\u003c\/strong\u003e Suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel (ISO M):\u003c\/strong\u003e Not Optimal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Temperature Alloys (ISO S):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Steel (ISO H):\u003c\/strong\u003e Not Recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLS-CT-0434 1\/4\" 60° Dovetail Cutter\u003c\/strong\u003e is designed for precision CNC milling of steel, cast iron and aluminum. Featuring sharp, uncoated carbide edges and a four-flute, 60° dovetail profile, this dovetail cutter provides clean, accurate undercuts in one setup.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e60° dovetail profile\u003c\/strong\u003e with four flutes cuts accurate dovetail slots and undercuts in a single pass. Sharp, uncoated carbide edges cut cleanly in aluminum, steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e1\/4\" cutting diameter\u003c\/strong\u003e, this versatile dovetail cutter is ideal for dovetail slots, undercuts, and back-chamfering.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible CNC milling machines, including the \u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e, the LS-CT-0434 is a versatile cutting tool for machinists, fabricators, and manufacturers working with steel, aluminum and cast iron parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e4-flute, 60° dovetail profile for slots and undercuts.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUncoated solid carbide with sharp cutting edges.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e60° dovetail angle for accurate dovetail slots.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/4\" diameter for cutting dovetail slots and undercuts.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with the Langmuir Systems MR-1 CNC Gantry Mill and other suitable CNC milling machines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.langmuirsystems.com\/mr1\"\u003e\u003cstrong\u003eLangmuir Systems MR-1 CNC Gantry Mill\u003c\/strong\u003e\u003c\/a\u003e for precision metal machining, or \u003ca href=\"https:\/\/www.langmuirsystems.com\/collections\/mr1-tooling\"\u003e\u003cstrong\u003eexplore our full selection of CNC cutting tools\u003c\/strong\u003e\u003c\/a\u003e to find the right tooling for your next project.\u003c\/p\u003e","brand":"Langmuir Systems","offers":[{"title":"Default Title","offer_id":44801428848718,"sku":"LS-CT-0434","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2587\/7650\/files\/14-60-dovetail-cutter-4-flute-uncoated-8908984.jpg?v=1793769309"}],"url":"https:\/\/www.langmuirsystems.com\/collections\/metal-cutting-end-mills.oembed","provider":"Langmuir Systems","version":"1.0","type":"link"}