Pineapple Art

3 Like
Cut Ready for

FireControl  [IHS/THC]

This project is ready to be cut on a CrossFire CNC Machine.
Input your own cut settings on download to customize this file for your specific project.


Simple pineapple art.

Creative Commons - Attribution

You may distribute, remix, tweak, and build upon this work, even commercially, as long as you credit Chris Clark for the original creation.


3 years ago







  • Pineapple.tap
  • Arnez - 3 years ago
    were there any errors with this on a Crossfire Pro? This was my first (test) run on the machine and I am getting an error with IHS failing. Error message: "IHS fail. The torch is not in the expected initial state before starting IHS cycle"

  • Langmuir Systems - 3 years ago
    Is your IHS indicator light always on? Is your IHS cable plugged in? Please contact support if you're still having an issue!

  • Jason Quenga - 3 years ago
    I just cut this out on 22 ga steel with the Razorweld on 20 and 25 amps on my Pro with THC. I also didn't change any of the program settings and downloaded the program as-is. It did need to be converted from a .tap file, but Fire Control did that for me. The first cut at 20 amps wasn't enough as it only cut through 50% of the steel. I turned it up to 25 and it cut it easily. I think an amp or 2 less would be the ideal setting. I am a noob and still learning, so I just used this as another piece to gain experience. The only issue I have with the design should be fixed in CAM. The entry/exit point is ON the pineapple outline instead of outside it. Otherwise, no complaints for a free file used to learn!

  • craig Coat Merrill - 2 years ago
    great file thanks for posting.

Authentication required

You must log in to post a comment.

Log in