- Contact Us
- 9AM-5PM CST, M-F
- (833) 526 - 4797
A production-ready 4' x 3' CNC plasma table for fabrication shops. Starting at $3,195.
Ready to bring CNC plasma cutting into your shop without overhauling it? The CrossFire PRO is a compact 4' x 3' CNC plasma table with a 48" x 33" cut area and a reinforced steel frame that fits where full-size tables can't. It plugs into a standard 120V outlet, ships UPS ground in three boxes, and pairs Autodesk Fusion 360 for design with FireControl for cutting, so you go from idea to finished part in one workflow. Sign makers, metal fabrication shops, and growing businesses use the CrossFire PRO to turn out brackets, signs, and custom parts on demand.
Need more cutting area or thicker cuts? See the CrossFire PRO MAX 4' x 4' CNC Plasma Table, or upgrade your PRO later with the PRO MAX Upgrade Kit. Compare the full range of CNC plasma tables.
Razorcut 45
Pierce 3/8" · Clean cut 1/2" · Sever 5/8"
Powermax45 SYNC
Pierce 1/2" · Clean cut 5/8" · Sever 1-1/8"
Powermax45 SYNC
Pierce 1/2" · Clean cut 1/2"
Hypertherm doesn't rate severance for stainless steel or aluminum, so these tabs show pierce and clean cut only.
Powermax45 SYNC
Pierce 3/8" · Clean cut 5/8"
Hypertherm doesn't rate severance for stainless steel or aluminum, so these tabs show pierce and clean cut only.
Clean cut is a production-quality cut at a good speed. Severance is the most the cutter can part, slowly and with rough edges. Pierce is the thickest plate it can start a hole in; thicker parts need an edge start.
A 48" x 33" CNC plasma table with a powered Z-axis, initial height sensing, and optional automatic torch height control.
Start with a package
Options
Electronics Kit: Touchscreen and PC
$750.00A 21.5" HD touchscreen with a Windows mini PC that runs FireControl at the machine.
Laptop Stand
$84.95Steel adjustable stand that keeps your laptop next to the machine.
Automatic Torch Height Controller (ATHC)
$400.00Keeps the torch at the right height as it cuts for consistent cut quality.
Limit Switch Kit
$95.00Home the machine to Machine Coordinate Zero and run programs with Work Coordinate Offsets.
NEW! Marker Pen Attachment
$19.95Mark your sheet without firing the torch to test programs and save material.
Choose one, or use your own.
Razorweld 45 CNC with Hand Torch
$995.0045 amp, 1/2" steel cut capacity, plug-and-play CNC port, and X45 hand torch. Or use your own.
Razorweld 45 CNC with Machine Torch
$1,289.0045 amp, 1/2" steel cut capacity, plug-and-play CNC port, and X45 machine torch.
Hypertherm Powermax45 SYNC with Machine Torch
$3,300.0045 amp, 5/8" steel cut capacity, CPC port. More info. Limited time: 3 free consumables. Offer expires 12/31/26
Razorweld X45 Machine Torch
$399.95Upgrade torch for the Razorweld 45 with better cut quality and longer consumable life.
Machine Torch Mount
$74.95Holds a machine torch on the Z-axis.
Hypertherm CPC Cable
$74.95Connects a Hypertherm SYNC cutter to the table.
NEW! Hypertherm SmartSYNC Handheld Torch
$789.95For hand cutting with a 45, 65, 85, or 105 SYNC. 75° head, 25 ft lead.
Razorweld 45 CNC Consumables Set
$159.755 nozzles, 5 electrodes, swirl ring, retaining cap, and shield. More info.
Hypertherm SYNC 45A Mechanized Cartridge
$56.00Best for 3-6 mm material.
Hypertherm SYNC 30-45A Mechanized FineCut Cartridge
$58.00Narrow kerf for detailed cuts in 3 mm material.
Hypertherm SYNC Cartridge Reader
$50.00Track your SYNC consumable use.
Every machine includes a 1-year limited warranty on hardware and 6 months on electronics. Terms apply.
Extended Warranty: Gold Plan
$299.95Our best coverage: 3-year extension to the base warranty and expedited shipping.
Extended Warranty: Silver Plan
$199.951-year extension to the base warranty.
Your CrossFire PRO
+$149 flat rate shipping to the contiguous USA. Ships in 2-3 business days.
CrossFire PRO orders placed today ship in 2-3 business days. You can get a full refund, minus a 2.4% transaction fee, until your order ships.
| Specification | Detail |
|---|---|
| Cutting Envelope Dimensions | 48” (X) x 33” (Y) x 2.75" (Z) + 3” Manual Height Adjustment |
| Machine Weight | 223 Pounds |
| Linear Bearing Type | Ball Bearing Carriages on Zinc-plated Steel Tube Rails |
| Stepper Motor Size | NEMA 23; X-Axis 284 oz-in, Y-Axis (2) 284 oz-in, Z-Axis 180 oz-in |
| PC Interface | Windows USB |
| Mechanical Drive System | 3/8”-8 4-Start ACME Lead Screws and Acetal Anti-Backlash Lead Nuts, 1/2” 5-Start Lead Screw (X) |
| Motion Accuracy | 0.002” per 12” |
| Step Resolution | 0.0005” |
| Maximum Cut Speed | 300 IPM |
| Table Surface | Replaceable Steel Slats, 50mm wide x 3mm thick |
| Input Power | 110/220 VAC (selectable) |
| Torch Height Control | Powered Z Axis with Floating Head Torch Mount and Initial Height Sensing. THC Compatible |
Every CrossFire, drawn to scale from above with its cut area shaded. Choose by the size of the sheets and parts you cut. Looking for a different size table? Learn more about the full range of CNC Plasma Tables in sizes ranging from 2' x 2' to 4' x 8'.
| Compact Series | Shop Series | Professional Series | Industrial Series | ||||
|---|---|---|---|---|---|---|---|
| CrossFire | CrossFire XL | CrossFire PRO | CrossFire PRO MAX | CrossFire XR | SideKick 8by ShopSabre | ShopMaster Pro 8by ShopSabre | |
| Top view | |||||||
| Cut area | 25" × 23"575 in² | 25" × 33"825 in² | 48" × 33"1,584 in² | 48" × 48"2,304 in² | 48" × 96"4,608 in² | 52" × 98"5,096 in² | 52" × 98"5,096 in² |
| Footprint | 44.2" × 42.5" | 44.2" × 52.5" | 69.5" × 54.2" | 69" × 69.5" | 62.4" × 108" | 81" × 118" | 91" × 127" |
| Highlights | Entry level. Fits a garage corner and runs on household power. | The CrossFire frame with 10" more length and a water table. | Powered Z-axis with height sensing for 4'-wide stock. | A full 4' × 4' bed built for heavier plate. | Full-sheet production machine with ball screws and THC. | Closed-loop drives, digital THC, and 1,500 IPM rapids. Cuts up to 2". Also in 4', 10', and 12' sizes. | Servo drives with glass encoders, 2,500 IPM rapids, and a 24" water table. Also in 10' and 12' sizes. |
| Works with | Razorcut 45, Powermax45 SYNC | Razorcut 45, Powermax45 SYNC | Razorcut 45, Powermax45 SYNC | Razorcut 45, Powermax45, 65, and 85 SYNC | Razorcut 45, Powermax45, 65, and 85 SYNC | Powermax45, 65, 85, 105, and 125 SYNC | Powermax45, 65, 85, 105, and 125 SYNC; Hypertherm XPR, HPR, and MAXPRO |
| Price | $1,995 | $2,295 | $3,195 | $3,395 | $6,995 | $23,9954' × 8', well equipped | $37,6954' × 8', well equipped |
| View Model CrossFire | View Model CrossFire XL | You're viewing this model | View Model CrossFire PRO MAX | View Model CrossFire XR | View on ShopSabre SideKick 8 (opens shopsabre.com) | View on ShopSabre ShopMaster Pro 8 (opens shopsabre.com) | |
CrossFire
Entry level. Fits a garage corner and runs on household power.
CrossFire XL
The CrossFire frame with 10" more length and a water table.
CrossFire PRO
Powered Z-axis with height sensing for 4'-wide stock.
CrossFire PRO MAX
A full 4' × 4' bed built for heavier plate.
CrossFire XR
Full-sheet production machine with ball screws and THC.
SideKick 8by ShopSabre
Closed-loop drives, digital THC, and 1,500 IPM rapids. Cuts up to 2". Also in 4', 10', and 12' sizes.
ShopMaster Pro 8by ShopSabre
Servo drives with glass encoders, 2,500 IPM rapids, and a 24" water table. Also in 10' and 12' sizes.
Top view, all drawn to the same scale.
The CrossFire PRO works with the Razorweld Razorcut 45 and the Hypertherm Powermax45 SYNC. Choose by the thickest steel you cut regularly.
The budget choice. Cuts steel cleanly to 1/2" and plugs straight into the PRO. Needs 6.7 CFM at 75 psi.
Cuts cleanly to 5/8" with single-cartridge consumables and a higher duty cycle. Needs only 4 scfm at 90 psi.
It must be blowback-start, use a machine torch, and have a torch lead at least 16' long.
For 3/4" to 1" steel, the CrossFire PRO MAX works with larger cutters up to the Powermax85 SYNC.
Answer two quick questions and we'll match a compatible plasma cutter.
Plan your power, air, and computer before your PRO arrives.
The PRO runs on one 120V, 20A outlet. Plan additional outlets for your air compressor and plasma cutter.
The PRO connects to your Windows laptop by USB and runs FireControl, our free motion control software.
Your compressor must keep up with your plasma cutter's rated air flow continuously. Add a filter or dryer to keep moisture and oil out of your consumables.
The PRO is wide enough for 4'-wide sheets, so you can pass a full 4' x 8' sheet through it. Use adjustable-height stands to support the sheet.
The stainless water table keeps your material cool and holds down fumes, but plasma still makes smoke. Cut in a well-ventilated space.
The PRO ships via UPS Ground in three boxes (about 130 lb, 60 lb, and 44 lb), with detailed assembly instructions.
The CrossFire PRO starts at $3,195 with FireControl software. Torch height control and a plasma cutter are optional add-ons, and you'll need your own Windows laptop and air compressor.
The cutting envelope of the PRO is 48” (X) x 33” (Y) x 2.75" (Z) + 3” Manual Height Adjustment.
The PRO's frame supports steel plate up to 1" thick, but cut thickness depends on your plasma cutter. With the cutters it supports, the Razorcut 45 cuts cleanly to 1/2" and the Powermax45 SYNC to 5/8". For thicker cuts, see the CrossFire PRO MAX.
Choose the PRO if your parts fit in 48" x 33", you cut up to 5/8" steel, and you want the lowest price. Choose the CrossFire PRO MAX, starting at $3,395, for a 4' x 4' cutting area, a deeper water table, and cutters up to the Powermax85 SYNC for 1" steel.
Yes. The $999 PRO MAX Upgrade Kit adds a deeper water table, 48" Y-axis tubes, and the drive components for the full 4' x 4' cutting area.
No. The PRO can't be expanded to 4' x 8', but the $999 PRO MAX Upgrade Kit takes it to a true 4' x 4' cutting area. For full-sheet cutting, see the CrossFire XR.
Yes. Choose the Affirm payment option during checkout to structure machine payments up to 36 months with competitive rates. Learn more about our financing options.
The machine runs on a single 120V, 20A outlet. You will need additional 120V or 240V outlets for your air compressor and plasma cutter.
The CrossFire PRO CNC plasma machine was designed to be a complete out-of-the-box solution for CNC plasma cutting. It includes everything that is needed to begin making parts with the exception of a computer, an air compressor, and a plasma cutter. Below is a snapshot of what is included with your basic machine purchase:
The CrossFire PRO is wide enough to support and cut a full 4’ width sheet. A full 4’ x 8’ sheet can be placed on the machine and passed through it for cutting. We recommend using adjustable-height stands to support a full sheet when passing through the machine.
IHS is the system that automatically senses the top surface of the material to ensure that the torch pierces at the perfect height for each cut. It works on wet, painted, or rusted surfaces. It's standard on every CrossFire PRO.
The automatic Torch Height Control unit is an electronic module that is wired to your plasma cutter and the PRO electronics enclosure for the purpose of maintaining the same torch-tip-to-material distance during cutting. This is required when cutting large sheets of material that may not be perfectly flat and also to account for material warpage during cutting.
If you plan to cut small and medium-sized parts 15” x 15” or less, then you may not need to purchase the THC module because the Initial Height Sense system will be sufficient for maintaining your torch-tip-to-material distance over a small area. If you plan to cut full sheets, or artwork and signage from thin-gauge material, we recommend adding the THC unit.
Yes, the front panel has an expansion port so that accessories such as limit switches and air scribers can be added by the owner. In the future, we plan to release add-on accessories to the machine that can be connected using this expansion port.
No. The floating head Z axis was specifically designed for plasma use only and is not compatible with a wood router.
Yes. Add-on accessories such as the laptop stand and THC can be purchased at a later date. Keep in mind that the price is discounted and the shipping is free when purchasing add-ons bundled together with the PRO.
The CrossFire PRO works with the Razorweld Razorcut 45 and the Hypertherm Powermax45 SYNC. See our plasma cutter compatibility page for details. Cutters bought elsewhere must be blowback-start, use a machine torch, and have a torch lead at least 16' long. If your torch lead is shorter, ask your plasma cutter manufacturer about a longer lead. Note: Vipercut 30i machines come standard with a 13' torch lead and need a longer lead to work on the PRO.
Langmuir Systems keeps an inventory of all replacement parts that go into a CrossFire PRO. Any necessary replacement parts will be shipped to you free of charge while your machine is still under factory warranty. After the warranty expires, simply email [email protected] for current pricing on replacement items.
The CrossFire PRO ships via UPS ground in three separate boxes weighing approximately 130 lb, 60 lb, and 44 lb.
Please see our Warranty, Refund, and Return Policy for full details on warranties, returns, and refunds.
All products sold directly by Langmuir Systems are eligible for return and refund. The terms of the return and refund policy are listed below: