Downloads | Langmuir Systems

Find and download files needed to get cutting on your CrossFire CNC Plasma.

Post Processors

The latest version (v1.2ls) of the CrossFire Motion Control firmware requires updated Post Processors and is incompatible with earlier versions. If your machine is running v1.1ls you must use v1.5 versions of the Post Processors. If your machine is running v1.2ls you must use v1.6 versions of the Post Processors. For more information on this update please see the update instructions on the Langmuir Systems Forum.

	CrossFire PRO / CrossFire with IHS & THC		CrossFire without IHS & THC
	CrossFire Motion Control v1.1ls	CrossFire Motion Control v1.2ls	CrossFire Motion Control v1.2ls
Fusion360	Fusion 360 Post v1.5	Fusion 360 Post v1.6	Fusion 360 Post v1.6 You must toggle both IHS and THC post settings to 'No'.
SheetCAM	SheetCAM Post v1.5	SheetCAM Post v1.6	SheetCAM Post v1.6 You must set both Pierce Height and Cut Height to 0 in the Jet Tool Menu.

Mach3 Software Download
- Download and install.
CrossFire Mach3 USB Motion Controller Plugin (v1.0)
- Download and move into Mach3 Plugins folder (Usually C:/Mach3/Plugins)
CrossFire Mach3 Profile (v1.1)
- Right-click, 'Save Link As'
- Move into Mach3 folder (Usually C:/Mach3)
Windows 10 Mach3 Patch
- If the CrossFire Profile won't open in the Mach3 Profile Loader, install this patch file.
CrossFire Break-in Program (Mach 3)
- Download and run in Mach3.
CrossFire Fusion 360 Post for Mach3
- Download and Install in Fusion 360.