Titan Essentials Press Brake Tooling Kit

Press Brake Punch and Die Set — Goose Neck, Acute Angle & 4-Way Die

The Titan Essentials Tooling Kit is the starter press brake tooling set for the Titan 25T CNC press brake, covering the punch and die profiles most sheet metal fabricators reach for every day. If you're setting up a new press brake and wondering what press brake tooling you need first, this kit is the answer: one goose neck punch, one acute angle punch, and one multi-opening die that together handle standard flanges, boxes, channels, and pre-hems in common sheet gauges.

Save 10% with the kit. Buying the Essentials Tooling Kit costs 10% less than purchasing the same goose neck punch, acute angle punch, 4-Way Die, and holders as individual press brake tooling segments.

What's included in this press brake tooling kit

• 85° Extreme Goose Neck Punch (1", 2", 2", 4", 8") — the deep-relief profile for return flanges, box bending, and parts where a straight punch would collide with the workpiece.
• 30° Acute Angle Punch (1", 2", 2", 4", 8", 16") — an air-bending punch for 90° flanges through acute angles and pre-hems.
• 4-Way Die (1", 2", 2", 4", 8", 16") — four V-die openings in a single die body, so you can match the opening to material thickness without swapping dies.
• 6× 4-Way Die Holders (6" length) — mounts the 4-Way Die to the Titan bed, ready to run out of the box.

Segmented press brake tooling for any bend length

Every punch and die in the kit is segmented press brake tooling. Combine the 1", 2", 4", 8", and 16" segments to build the exact tool length your part calls for, or leave gaps between segments for window bends and box corners. Segmented tooling also means you're never lifting a full-length punch to change setups.

Applications

Enclosures and electrical boxes, brackets and mounting plates, HVAC ductwork, chassis and frames, sign blanks, and general sheet metal fabrication in mild steel, stainless, and aluminum sheet.

Frequently asked questions

Is this the right first tooling kit for a Titan press brake? Yes. The Essentials Kit is the recommended starting point; the Acute Bending and Complete Tooling Kits add specialty and heavy-duty profiles on top of it.

Can I add individual punches and dies later? Absolutely. Every profile in this kit is also sold as individual segments.

Need a specific punch or die to round out your setup? Browse the full line of Titan press brake tooling. New to the Titan? See what the Titan 25T CNC Press Brake can do and why it belongs on your shop floor.